I could maybe have been a lil more creative with the quilting, but in the end I kept things fairly simple, with sharp stippling in red and back on the masks and smooth stippling on all the background areas. The eyes and mouth were left largely unquilted because I liked the way that looked.
The back shows the quilted design really clearly as well:
Because this is intended as a wall hanging, I added corner pockets at the top to hold a dowel, and did reasonably successful machine binding for the first time ever thanks to the application of loads of Clover wonder clips:
All the quilting was done by using the 6D spring foot with Guettermann Sulky rayon thread, a 80/12 embroidery needle, a tension of 4.0 and a pivot height of -1.
I didn’t have any skipped stitches (that I noticed) and very few thread breakages. This was a HUGE improvement over the last time I tried quilting with rayon! This time, the thread behaved really well, even allowing me to thread-paint over some warbly spots where I’d wobbled off the line thanks to my not-amazing FMQ skills. Woo!
It’s in the post to its new home now and I will be in a mild state of anxiety until I know that it’s arrived safely and that its new owner likes it – most Craftster swaps are done with a reasonable degree of secrecy so unless she’s checked out this blog, the recipient should have no idea what I’ve sent her. *bites nails nervously*
I’m not going to claim there were no hiccups along the way, the seam ripper saw action more than once, but on the whole I was pleased by how well this design went together. It was probably rather overkill, but it was also massively educational and will give me loads more confidence to tackle the creation of the other foundation-pieced designs I have in mind to do. It’s now all basted up and ready for me to start quilting on once I’ve shovelled a bit of work out of the way first. Yay!
Work is trying to bury me under the Christmas backlog, it’s tax return month and I just lost a favourite pet, so of course it must also be time for me to do a craft swap. In fairness though, I signed up for this one before life went a bit nuts. Just one of those things you can’t predict. To add to the fun, I have elected to do a massively complicated self-designed quilt layout – again, a decision I made before things went a bit sideways in my non-quilty life. However, it’s been a good distraction and I adore a challenge, so for the past couple of weeks I have been chasing polygons around in ever-decreasing circles. Also, diamonds? They are SO not a girl’s best friend!
My partner in the swap specified red, black, white, grey and silver as favourite colours, and the theatre and travel as interests. I’ve always quite liked the duality of the tragedy and comedy masks, so I did a Google image search and looked at loads of images to get some inspiration.
This one in particular, which featured diamond patterns in red and black on the masks, really caught my eye and set my mind whirling. I didn’t want to copy the image exactly, but I liked the notion of diamonds and red/black and fragmentation so much that I decided to play with it more, and came up (after a few variations) with the image below.
Did I mention recently that I love Inkscape? I really love Inkscape! Hooray for open-source vector jiggery-pokery!
Drawing the basic image, however, proved to be the easy bit. The swap organiser has firmly stated Views on the subject of applique, so this is going to have to be foundation pieced, and I’m aiming for it to finish at about 16-1/2″ square. It will be by far the most complicated foundation piecing I have yet done, and orders of magnitude more complicated in design than my Origami Cranes. Even with my slowly improving skill at getting Inky’s snapping features to do my bidding, it took me quite a lot of fiddling, experimentation and pondering to sort out a workable-looking “map” of component parts for the comedy side, and yet more time to do the same for the tragedy side because of the very awkward blend of mirror and rotational symmetry, except not quite. The diamonds proved to be really quite awkward to piece around in a reasonably non-destructive way, but I’m pretty much there now and part of my shopping trip last Saturday was to Calico Kate in Lampeter so that I could pick up some nice fabric for the quilt – because of the fiddly nature of the pieces, I wanted to make sure I had fabrics that would “read” clearly (and enough of them!).
The red, the black and the silver/grey dotty ripples are new, the other bits are scraps of RK’s Shimmer 2, Michael Miller’s Fairy Frost and a speckly white/silver/light grey effort that I can’t recall the name or make of, which I had kicking around in my newly sorted scrap bins and wanted to also include in the background. This is a pretty good representation of the actual colours, unlike subsequent pics, which were taken under the rather yellow lights in my craft room! As a useful exercise, I wrote out comprehensive piecing instructions and diagrams to help with assembly.
Tentatively, I started assembling the first section, and was gratified to find it behaving itself.
I’m loving this squiggly red print! Really striking against the shimmering background.
Right from the get-go, I decided to trim all seams within each section to 1/8″, rather than the more usual 1/4″, which has helped a lot to manage seam bulk already. Given this is an art/mini/wall quilt, and I’ll be quilting it fairly well, I decided I could get away with a smaller seam allowance here. Completed sections are joined with a 1/4″ seam pressed open:
Another thing that has proved extremely useful for joining completed areas is mini binding clips. I bought some recently because they looked so jolly handy for all sorts of things (and they were on offer on Craftsy!), and decided to use them here instead of pins to avoid rippling up these fairly small and heavily pieced bits. It works a lot better!
The top section was joined using pins, the bottom section was joined (mainly) using the binding clips – there’s a definite difference in accuracy! I’m thrilled that this looks to be working so well, and I hope to crack on and do the rest in fairly short order so that I can get to the quilting. 🙂