I did most of the outline quilting on the fans at Quilt Club last week, now I’m working on the straight lines on the “plain” halves of the fan blades. One half of the curtain is now quilted like this, next I will do the same to the other half and then steel myself for the FMQ.I was worried that the metallic thread would be too much on the blades (especially the black ones), but I think it helps to differentiate fans from frames, which is important given they’re all the same fabrics! This is particularly important for the red fans because they sit right next to the red frames.
Cath from Quilt Club has been involved with Project Linus for some time, and recently became an organiser for our area. In a show of solidarity and team spirit, most of Quilt Club showed up to attend her first Project Linus Sewing Day last Thursday. We were told to turn up armed with our sewing machines only, everything else (including thread) would be provided.
She wasn’t kidding! There was a long table crammed with baskets full of enticing fabrics (why are other peoples’ scraps always more interesting?), wadding, loads of reels of thread (though I ended up using my own because I prefer to piece with cotton). As well as familiar Quilt Club faces, there were several people I hadn’t met before, including the lady who runs night classes in PW&Q at the local college. Everyone was very friendly and keen to quilt up a storm of Linus quilts!
After making all the heart blocks for the Wedding Quilt, I was left with a whole bunch of half-square triangles trimmed from the corners. The larger triangles come from the bases of the hearts, the smaller ones are from the top points of the hearts.
I didn’t keep all the off-cut triangles; some weren’t cut well and I chucked some of the smaller ones because I wasn’t sure they’d be big enough to do anything sensible with. But there’s still a whole bunch of the things! 😮
After making one tea cosy for mum, I decided to make a second for her birthday because I wasn’t completely happy with how the first turned out. This, then, is how I made tea cosy v.2.0, and it was actually rather easier than the first, as well as fitting the tea pot better. 🙂 (I’ll update with some pix if/when I take some.)
Required (for a good-sized tea pot):
Coordinating fabrics; enough to make 20 dresden plate blades 8″ long
Scrap of fabric big enough to make the centre circle of the dresden plate
2 1/2″ wide strip of fabric for the elasticated strap (8-10″ long is good)
Wadding (I used a heat-resistant wadding, but I think ordinary wadding would be fine too)
Lining fabric; must be big enough to cover the completed dresden plate (I used therma-flec, but again, I think ordinary fabric would be fine)
Well that was an interesting year. Not the easiest we’ve ever had, what with new babies and household crises, but we seem to have survived, just about! It has also, for me, been a year of much quilting. It’s very easy, when reading forum threads and blog posts from apparently super-human peeps churning out king-sized quilts every other day, to feel that I’m not managing much in comparison, but in fact I think I’ve had a fairly good year for actually finishing things, even though I still have some substantial projects outstanding.
Actually, I think that’s quite a lot of things finished. Especially since some of them are quite sizeable or have multiple parts. And there were a couple of little projects that never made it to the point of being photographed (a couple of pot holders and a phone case for mum, iirc.) *slightly proud face*
That Damn Wedding Quilt! It’s becoming a serious bugbear now. I have the fabric I need to do the necessary Bs (border, backing, binding) for it, I just need the confidence, time and space to tackle those last bits. Oh, and the quilting. Oh god, the quilting! Though I seriously hope my new machine will help greatly there, what with the bigger throat space and the huge extension table. After I’ve cleared mum’s birthday and a couple of outstanding unfinished Christmas presents, I must make this the number one priority; maybe it’ll be done by Sian’s birthday in March (or by their wedding anniversary in June at the latest!).
Japan Fans door curtain. I started the quilting, then had to stop because I was running out of my chosen metallic thread. However, I bought plenty more so I have no excuse now. Chances of me finishing this before mum’s birthday on the 5th are slim-to-none, but there’s always Mothering Sunday!
Baby quilt #1. *SO* nearly done! ;A; This is the one with the mangled quilting thanks to my cheap-ass walking foot copping out on me. I’ve unpicked the snaggly bits, I just need to point the Pfaff at it and let ‘er rip. So to speak. And then spend AGES brushing off all the linty bits from the wadding that have coated ALL the black fabric. 🙁 Suddenly I get the point of black wadding!
Baby quilt #2. Still in a pile of unconnected, untrimmed HSTs on my cutting table. 🙁 Though I did trim a few more yesterday. It’s tedious but undemanding work, at least. When I was doing the festive table set, I figured out a quicker way to trim HSTs before ironing them (very handy given the tiny size of the ones used there), but unfortunately all these are already ironed so I just have to grit my teeth and trim all the sides.
Disappearing Nine-Patch. The back of this is still all over the floor of my craft room, looking sad and reproachful because it was shoved down the to-do list thanks to my focus on Christmas presents. And the fact that I don’t much like sewing Y seams. I must be brave and tackle it.
…Other odds ‘n’ sods. Like that weird tea-coloured D9P and the scrappy batik squares I made. Oh, and the hilariously late Advent Calendar. (It’ll have to be ready for *next* Christmas!) I’m sure there are more that I just can’t remember right now! :p I’m also developing quite a mess of scraps, so at some point I need to spend some time trimming them down into usable squares and doing …something… with them. Maybe a Linus quilt or two; one of my fellow Quilt Clubbers is now an organiser for the Linus Project and I’m sure she’d welcome the contribution.
I also have vague and not-so-vague plans for more quilty projects, fuelled at least in part by recent fabric purchases. Sometimes I think I shouldn’t be allowed out unsupervised! I’ll show off my recent acquisitions in a future post, though. Whatever else 2015 might bring, I have a feeling there will be quilts in there too!
One day, I will totally follow through with my intention to start making Christmas presents early and finish them on time. However, Christmas 2014 was no break from my usual tradition of being up in the wee small hours of Christmas Eve/Christmas Day frantically trying to finish making something, and I didn’t manage to finish anything like the amount of things I wanted to make. That’s par for the course too, and a “tradition” I’d really like to give up!
So that’s a Thing right there. I hope I did it right. Work’s been quiet recently so I’ve been doing quite a lot of sewing instead. How did I do that with an apparently broken sewing machine? Well, turned out that the problem wasn’t the machine, it was my walking foot. As long as I don’t want to quilt anything, I can sew to my heart’s content. And speaking of hearts, I’ve finally made a major leap forward with a major project, the project that kind of kicked all this off:
I’ve managed to get very little done recently. Partly because I’ve had nowhere to set up a sewing machine and partly because all my sewing machines seem to be in various stages of death. Mum’s Huskystar, which has been my principle machine for at least a year, got caught in a plumbing leak we had and was found sitting in a puddle of water. I took it to my trusty sewing machine repair man and he worked minor miracles to clean out the rust and get it working again (fortunately it’s a purely mechanical machine), but when I came to use it at Quilt Club I found that the tension seemed to be all over the place, it was not sounding completely right, and then a screw fell out while I was doing a bit of free-motion quilting on the border. Ack. And Toby’s quilt is now partially quilted but I think I’m going to have to rip it all out and start again because the back is a nightmare of loops. I’m going to take it back to Mr Knight to see if anything can be done to salvage it (again!). But that’s ok, I thought – I have my cheap-ass AEG machine that I bought in Germany! It’s been serviced and sorted after I accidentally nadgered it, let’s see how that works out. It won’t FMQ (can’t drop the feed dogs), but maybe I can make a start on piecing Jess’s quilt!